Clothing Accessories: Clothing Hot Drilling Classification Introduction

< p > > a href= "//www.sjfzxm.com/news/" > crystal hot drill < /a > as a fashion product, is gradually entering into people's life, widely used in fashion and sweater.

Now we introduce several crystal stones on the market.

< /p >

< p > 1, Austria SWAROVSKI hot drill < /p >.

< p > gum is gray.

There are 14 cut, 12 cut, 8 cut three kinds of products, of which 12 products have been discontinued, 8 cut products are only white and white colorful two kinds.

The color and specifications of the 14 cut products are quite complete.

The lead content of the material is 30%, < /p >.

< p > hot drilling temperature of 175 degrees, comprehensive defective rate of 3%-5%, excellent quality, solid and reliable, can withstand water washing and dry cleaning.

But the price is high, which belongs to the advertising market.

< /p >

< p > 2, Czech hot drill < /p >.

< p > the gum is pparent and has bubbles.

For the 8 cut products, the lead is 25%, the ironing temperature is 140 degrees, the comprehensive defective rate is 3%-5%, the quality is excellent, the price is second only to the Austrian drill, and it belongs to the mainstream market product.

< /p >

< p > 3, South Korea < a href= "//www.sjfzxm.com/news/index_c.asp" > hot drill < /a > /p >

< p > the back is light green, with 10 sections, the lead content is about 5%, the temperature at ironing is about 120 degrees, and the comprehensive defective rate is 3%-5%. After years of market verification, it has reliable quality, excellent washing fastness, pure color, uniform cutting and low price, and is the mainstream market product.

< /p >

< p > 4, homemade hot drill < /p >.

< p > the back is dark green, the 8 section products are not leaded, and the ironing temperature is 80 degrees.

The defective rate is very high, the color fastness is poor, and the color is different from each other. Because of its low price and a certain market share, it is mainly applied to the garment produced in mass production.

< /p >

< p > 5, homemade acrylic: < /p >

< p > strictly speaking, acrylic is not a diamond, it is a product between plastic and glass.

The brightness is good and the firmness is bad. The temperature of hot drilling should not be too high. If it exceeds 80 degrees, it may lead to the melting of acrylic resin.

It is commonly used in low-grade < a href= "//www.sjfzxm.com > children's wear < /a >.

< /p >

< p > note: < /p >

< p > lead content determines the brightness of the hot drill, but the lead content is not the higher the better. By scientific experiment, when the lead content is more than 30%, the brightness is the best, and the brightness of the lead-free product is the worst.

< /p >